Victron BlueSolar MPPT 150\35
Charge current up to 35 A and PV voltage up to 150 V
The BlueSolar charge controller will charge a lower nominal-voltage battery with a higher nominal voltage PV array. The controller will automatically adjust to 12 V, 24 V or 48 V nominal battery voltage.(software tool needed to select 36 V)
Ultra-fast Maximum Power Point Tracking (MPPT)
Especially in case of a clouded sky, when light intensity is changing continuously, an ultra-fast MPPT controller will improve energy harvest by up to 30% compared to PWM charge controllers and by up to 10% compared to slower MPPT controllers.
Advanced Maximum Power Point Detection in case of partial shading conditions
If partial shading occurs, two or more maximum power points may be present on the power-voltage curve. Conventional MPPT’s tend to lock to a local MPP, which may not be the optimum MPP. The innovative BlueSolar algorithm will always maximize energy harvest by locking to the optimum MPP.
Click the link below for further information on how to configure this Charge Controller to get the most from it.
Configure settings of MPPT charge controllers with a VE.Direct comm. port: 75/15, 100/15, 100/30, 75/50, 100/50 and the 150/35.