Now accepting PayPal

Eco Zilmet Metal Discharge Fluid Recovery Container with Drain Valve

Eco Zilmet Metal Discharge Fluid Recovery Container with Drain Valve
Our Price:  £65.13
List Price:  £86.77
Saving Of:  £21.64 (25%)
(Exc. 20% VAT)(£78.16 Inc. VAT)

Model:  MVPG001
Dimensions:  203mm wide x 592mm high
Capacity:  12 Litres



Low stock, immediate despatch

Construction:   Carbon Steel
Finish:  Silver Powder Coated

Safety Valve Discharge Tank with Fluid Recovery Valve


This discharge tank should be installed on the connection pipe between the safety valve discharge connection and the tank (not included). Pipe must be metal, copper or stainless steel.

  • Discharge pipes should not reduce in diameter relative to the outlet of the valve, be copper or stainless steel, and be as short as possible (no more than 1 elbow ideally used in the pipework from the valve to the discharge tank). Pipe should be fixed to avoid accidental movement or removal.
  • High temperature warning label should be visible on the Discharge Tank.
  • The Discharge tank should be fixed in a permanent position to avoid accidental movement or removal, The positioning of the tank should provide good access, and a high temperature drain valve (110C +)
  • Care should be taken to calculate that the tank is capable of holding the entire fluid content of the system above the safety valve.
  • The tank must at all times be open to atmosphere and always have an available air gap (do not seal the pipe entry point into the tank).