Hollybrook Power Supplies' Caravan / Motorhome Solar Kit
This kit contains everything required for fitting to your vehicle. The kits are suitable for caravans, motorhomes, boats etc.
These kits have been put together to provide everything you will need to install, including the small things like connectors and fuses.
- 2 x 100w solar panel (Panel Dimensions:1200mm x 550mm x 35mm)
- Victron MTTP 15A Charge Controller (see note below)
- 1 Sets of Corner Mounts (4) for fixing to the roof
- 1 Pair of Side Mounts for fixing to the roof to bridge between the two panels
- 1 Tube of Bonding Agent
- Double cable entry gland
- 6 meters of 4mm solar cable.
- Small connection kit, to ensure a safe, tidy connection.
Victron MPPT Charge Controllers are designed to extract the maximum available power from PV module by making them operate at the most efficient voltage (maximum power point). The MPPT checks output of PV module, compares it to battery voltage then fixes what is the best power that PV module can produce to charge the battery and converts it to the best voltage to get maximum current into battery. It can also supply power to a DC load and be programmed using free software. Extra cable required.
The MPPT controller can be connected directly to a BMV700 Battery monitor for closer monitoring and control of battery charging.