Hollybrook Power Supplies' Caravan / Motorhome Solar kits come with everything required for fitting to your vehicle. The kits are suitable for caravans, motor homes, boats etc.
These kits have been put together to provide everything you will need to install, including the battery charging leads which are fused and the adhesive. Please check as many companies require you to purchase extra items to actually complete the installation!
- 100w solar panel (1200mm x 550mm x 35mm) MCS certified
- Victron 10A PWM Charge Controller (see note below)
- Corner Mounts for fixing to the roof
- 1 Tube of Bonding Agent
- Double cable entry gland
- 10 meters of 4mm solar cable with waterproof MC4 connectors.
- Charging leads made up for you with fuse installed and terminal connections.
Victron PWM solar chargers use technology similar to other modern high quality battery chargers. When a battery voltage reaches the regulation set point, the PWM algorithm slowly reduces the charging current to avoid heating and gassing of the battery, yet the charging continues to return the maximum amount of energy to the battery in the shortest time. The result is a higher charging efficiency, rapid recharging, and a healthy battery at full capacity.
YOU DO NOT NEED A DUAL CONTROLLER AS YOUR STARTER BATTERY IS NEVER DRAINED BY YOUR LIGHTS ETC. IT IS HAPPY TO SIT UNCHARGED FOR LONG PERIODS AS ANY CAR BATTERY WILL DO. A DUAL CONTROLLER IS NOT A SUBSTITUTE FOR A FAILING STARTER BATTERY.
Better spend the extra money on a decent EU sourced controller. We guarantee our controllers for 5 years.!!